4 Mister Landscaper 1/2-in Polypropylene Drip Irrigation Tee (MLF-34) + 4 Packs 1 GPH Dripper With Coupler (MLD-PC1 / 44221) + 1 Pack 180° Half Circle Fan Spray (MLM-44 / 87861) Bundle Details:
- Use these fittings when attaching our 1/2-in poly tubing to run a water supply to micro or drip irrigation in opposite directions off an existing underground irrigation system
- These fittings will attach to a PVC riser with a 1/2-in FNPT or if the riser had a 1/2-in MNPT then you can use the enclosed 1/2-in threaded coupling to join the 2 fittings
- Ergonomically designed to make installation easier and to create a secure fit based on your hand strength
- Once these fittings are attached to the PVC riser then next attach the 1/2-in poly tubing by first pushing back the locking collar to expose the barb with a built in O-ring
- Next push and wiggle the 1/2-in poly onto the fitting and under the collar until snug
- Now while holding the tubing with 1 hand turn the ears of the collar in a left counter clockwise motion to tightened and lock onto the 1/2-in poly tubing
- These fittings can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly
- These fittings work with 1/2-in poly tubing that has an inside dimension of 0.600-in ID and an outside dimensions of 0.700-in OD
- Bundle with these 4 Tee fittings ( MLF-34 ) are 4 packs of 1 GPH Dripper with coupler ( MLD-PC1 / 44221 ) & 1 Pack of 180° Half Circle Fan Spray ( MLM-44 / 87861 )
- Proudly made in the USA
Fast Free Shipping!