COATS® 50 series
TIRE CHANGER

Complete Remanufacturing Service
ONLY
 


 
Built to Make Changing Low Profiles, Run flats, and other Tough Tires Fast and Easy
 

 

All Rebuild services Come With A 1 Year Parts Warranty
With Full Technical Support
 
What Makes Us Different Is Our Process
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following

 

  • Completely Remanufactured By Our Qualified Trained Technicians
  • Each machine is completely disassembled down to the frame.
  • Each Frame is stripped, primed and repainted with Sherwin Williams Industrial Grade primer and enamel
  • Swing Arm to Column Bushings are replaced.
  • Transmission Disassembled (See Pictures)
  • All components cleaned - NEW Seals - O rings - Bearings are replaced.
  • Gears are checked and replaced as needed to meet original factory specs.
  • Case refilled with NEW oil and checked for proper operation.
  • All E and EX Models come with NEW Turntable Drive Motor - Wiring Harness - Forward Reverse Switch.
  • All Air Motors are disassembled - Cleaned - NEW Vanes - Bearings - Seals replaced and repainted.
  • One-way Flow Valves Reassembled - Torque and PSI settings tested to original factory specs.
  • NEW 4-way Valves replaced to provide function of the Table Rotation - Bead Breaker System - Table Clamp Movement.
  • Table disassembled - all moving parts readjusted and lubricated. We reset Carriers and Jaws.
  • Table - Bead Breaker - B/L Cylinder are cleaned and repainted. Plungers and Seals replaced.
  • Replace Cylinder Sleeve as needed. We reassemble and test to factory PSI settings.
  • Replaced with all NEW - Hoses - Hard Lines – Bolts -  Bead Breaker Button - Actuator Valve - Machine Oil -Regulator - Tire Inflator Whip Hose - Bottle and Brush.
  • Table clamps are to Factory Specs.
  • NEW Removable plastic covers for protecting Rims on each clamp.
  • Gauges tested and replaced with new as needed.
  • Pressure Limiter Assembly disassembled and all O Rings and Diaphragms Replaced. Pedal Assembly disassembled, cleaned, checked for wear and adjusted and repainted.
  • After the Tire Changer has been reassembled it is tested thoroughly by changing tires multiple times to ensure proper functioning.
  • Complete PDF copies of the Operator and Spare Parts manuals come with each machine
  • The machine is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
  • All rebuilt machines come with 1 Year Parts Warranty with full technical support

 

 Basic Specifications: 

 

Rim Diameter   6" - 22" External; 8" - 25" Internal
 (28" with optional extender clamps - available for additional cost) 
Rim Width 14" Maximum 
Tire Diameter 50" Maximum 
Drive System Air 
Air Source (Air) 150 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI 
Chassis Footprint 35"W x 44"D x 75"H 
Shipping Weight 585 lbs 
 
 


Current Dealer Pricing: $5899.00
 
HAVE YOUR USED 50 series REMANUFACTURED NOW : $2249.00


Remanufacturing Service Available

for your Coats®, Corghi®, or John Bean® Tire Equipment
OR
Trade in your tire equipment for one of our completely remanufactured units...

We also purchase used tire equipment

We are the largest tire equipment rebuilder in the US

 

Standard shipping available to most locations in the US and Canada.

Certain remote locations may require additional cost

Shipping costs include pickup and delivery of your order to a business address with a dock or other way to load or unload truck 

Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.



ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED

Contact us for more information

Please visit our store for more tire maintenance equipment

 

Seller reserves the right to withdraw item from auction at anytime due to prior sale.


IES sells Quality remanufactured products

  • The contents of this listing refers to remanufactured products and/or equipment.
  • IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
  • Each product listing details the remanufacturing process IES uses for each product it sells.
  • The products sold  have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
  • Where indicated, IES provides buyer protection for a parts warranty and full technical support. 


COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc.
 
 
 
Please contact us if you have additional questions.