To program keys when all keys have been lost:

1. Using the transponder master key, switch the ignition to the “ON” position

2. Insert the tool into the OBDII port. You will hear one beep. After about 3 seconds, tool will beep 3 more times indicating that the vehicle has been placed into programming mode.

3. Remove the tool and the key.

4. Perform the following steps to program the keys: a. Close all doors b. Insert the first master key for 5 seconds (do not turn) c. Insert the second key for 5 seconds (do not turn) d. Insert the valet key for 5 seconds (do not turn) e. Programming mode should automatically end. If, for some reason, you need to end programming mode manually, simply insert and remove the first master key 5 times (do not turn).

To program additional keys when you have one working master key:

1. Using the working master key, switch the ignition to the “ON” position

2. Insert the tool into the OBDII port. You will hear one beep. After about 3 seconds, tool will beep 3 more times indicating that the vehicle has been placed into programming mode.

3. Remove the tool and the key.

4. Perform the following steps to program the keys: a. Close all doors b. Insert the first master key needing programming for 5 seconds (do not turn) c. Repeat step B for each key needing programming d. Insert and remove the original master key 5 times (do not turn) to end programming