infinity pur mp75 polyurethane hot melt cartridge ean 0700604237146, 0037083013214, 7147905900912
75 second set time -multipurpose adhesive -stronger than traditional hot melt -50-gram cartridge
Franklin international 1321 Titebond mp75 polyurethane hot melt 31132
Titebond mp75 and will fit all existing Hipurformer cartridge guns.
it is a high-performance polyurethane hot melt that bonds to a wide range of substrates. it offers a longer open time - around 75 seconds - giving users ample time to set their substrates or bond larger surfaces before the adhesive sets. it can be used to bond wood, metal, plastics, cement, ceramic and more.
offers a significantly stronger bond than traditional glue sticks or bulk hot melt. it also holds up better to difficult conditions including interior and exterior applications. pur mp75 offers a good initial tack and a bond that will continue to strengthen as it reacts with moisture in the air.
polyurethane hot melt adhesives, mp75, multipurpose formula with 75 second set time, bonds most common materials including ceramics, metal, most plastics, marble, glass, frp, brick, wood and more, stronger, more permanent, less brittle bond than "super" glues, better, outperforms traditional hot melts, won't foam like other polyurethanes
this powerful adhesive is designed for use with the Hipurformer glue gun by Steinel. it’s extremely versatile and will make just about any material stick to something else, including wood, melamine, ceramics, metal, most plastics, marble, glass, frp, brick, and more. it sets quickly, in just 75 seconds, so you won’t even have time for clamping. This waterproof adhesive can be used for either interior or exterior applications. its powerful initial bond strength (600+ psi maple/maple after 10 minutes) allows machining within minutes. it has a shelf life of 1 year but please note that opened cartridges should be used use within 30 days.
features
|
time |
strength psi of mp75 |
|
10 min |
270 |
|
1 hour |
600 |
|
24 hours infinity pur mp75 polyurethane hot melt cartridge 75 second dry time mp75 pur hot melt is a general-purpose adhesive that is extremely versatile and creates a strong bond between a wide variety of substrates. it has a set time of 3 - 4.5 minutes and will continue to cure as it interacts with moisture from the air. one cartridge produces approximately 50 linear feet of adhesive. it is waterproof, making it a great solution for both interior and exterior projects. the mp75 is a standard temperature pur that is applied at 250 degrees f. this pur hot melt greatly reduces and even eliminates the need for staples, nails, screws and other fasteners because of its quick set time and superb bond strength.
|