Ultrasonic Skin Scrubber Ultrasonic Cleaning Peeling & Ems Face Massager Por

Four modes function description
1、lon+-positive ion export mode
Remove the dirt in the deep pores through the export of positive ions;.
2、lon---negative ion introduction mode
Deeply lead to nourish the skin, rejuvenate and rejuvenate the skin within reach.
3、EMS pulse-EMS pulse mode
Lifts and tightens, awakens sleeping collagen tissue, and rejuvenates the skin's radiance.
4、Peeling lifting-Ultrasonic cleaning mode
Ultrasonic atomization and vibration. Cleans the bottom of the skin, removes the stratum corneum, and softens the skin;
Tips
1. When using, hold the conductive strip on the side of the machine with your hand, so that the ion import and export function can work normally.
2. When using, the angle of the shovel blade should be operated as shown in the figure (about 45 degrees).
3. Don't stay fixed somewhere on the face, move slowly.
4. If there is inflammation on the face, wait for the symptoms to disappear before using it.
5. It is recommended to use 2-3 times a week, please do not use it multiple times within one day.
6. During operation, the shovel blade and the body should be protected and clean.
7. It is recommended to fully charge the device for the first use

AmazeFan
Ultrasonic Skin Scrubber
To bring you a clean skin
4 Functional Modes
01 lon+
The positive ion derived mode
02 lon-
Negative ion derived mode
03 Power·Charge
Tight pull mode
04 Peling·lifing
Ultrasonic blackhead eradication mode
Ultraviolet rays, stay up late ,make up ect.
Cause a lot of Skin Problems
Effect Comparison
The pores are obviously clean after useHigh-frequency Ultrasonic Oscillation + Dual Derivation of Positive lons
Powerful dirt removal,Deep cleansing the face
Through high-frequency vibration,Ultrasonic mode-used in conjunction with daily cleansing milk to deeply cleanse the face.
Ultrasonic Dual-frequency Oscillation + Double lon Introduction
Better absorption of skin care essence
Negative ions increase the activity of cells and promote the absorption of skin care nutrition essence,makes the skin full of vitality.
EMS Microcurrent Stimulation
EMS mode can lift and tighten the skin,remove deep wrinkles,
enhance skin elasticity and make your skin firm.
EMS Microcurrent Stimulation
EMS mode can lift and tighten the skin, remove deep wrinkles,
enhance skin elasticity and make your skin firm.
Technology and Safety
Products have passed FC, CE, RoSH certification
Easy to Use with 4 Steps
Step 1:
Wash Your Face With Water.
Keep your face wet. Then, turn on the device to "clean" mode and gently clean the face for about 2-3 minutes. During this treatment, add water to your face to keep it moist.
Step 2:
Remove Blackheads.
At first to use a facial steamer or hot tower to compress the pores to open the pores. At second to open the clean-ing mode, nozzles face inward, and close to nose to push up. Finally, the blackheads was sucked out all , then clean the nose.
Step 3:
Dry. your face and apply ordinary moisturizer.
Switch the device to "moisturizing" mode, and use SPATULA to quickly import nutrients to improve skin ab- sorptio
Step 4:
Tight pull.
The "lift" mode can actively lift the pul-sation into the muscles, reduce wrinkles and fine lines, and make your skin look healthier and younger.
Product Details
Metal Shovel Head
Stainless steel material,fits the curvature of the face
Dust Cover
Protect the shovel head
Multifunction
4 modes

Warm Reminder
- When using the instrument , hold the ion sensor strip on the side;
keep the shovel head contact your skin to ensure the EMS and ion function work normally.
- The angle of the shovel face should be operated as shown in the figure ( about 45 degree ).
- Do not keep the shovel head stay in the same point for a long time, remove it slowly.
- If there is inflammation on your face, use it until the symptoms disappear.
2-3 times a week are suggested . Do not use it multiple times a day.
- Keep the shovel face and instrument clean when operating.

Charging time: 2H

Continuous use time: 50 minutes

Net weight: 95g

Product size: 175x43x14mm

Product material: ABS

Rated power: 1W

Battery capacity: 500mAh

Voltage: DC 5V

Product name: Ultrasonic cleaner

Brand: AmazeFan.

Description:

Instructions
[Switch button]
1. Press and hold for 2 seconds to turn on the device. The default setting is Peeling lifting mode for the first time, and the LED1 indicator is always on.
2. Gear switching, short press 4 gears to switch in cycles, followed by: Peeling lifting mode, LED1 indicates
The indicator light is always on-→ EMS pulse mode, LED2 indicator light flashes quickly-→ lon + import mode, LED3 indicator: the light is always on, one +lon-import mode, LED4 indicator light is always on.
3. Short press to turn on and the buzzer to tick once when the mode is switched, long press for 2 seconds to turn off the buzzer to tick 2 times, long press for 2 seconds to shut down, (long press for 2 seconds in any position to shut down).
[Charging instructions]
1. When charging: LED1, LED2, LED3, LED4 indicator breathing mode
2. When fully charged: LED1, LED2, LED3, LED4 indicator lights are off, when the battery is low, the buzzer will beep twice, and the machine will shut down.