|
Acid Tactical® Camouflage Stencil Set - FOUR Unique Designs
MICRO Patterns - Hex, Diamond, Ellipse, Triangle
|
NEW ADHESIVE DESIGN - Stick on, Paint, Peel Off 9x14" Sheets - Read product description for full details. 4 stencils in 4 unique designs (LIMITED TIME - You will receive 1 FREE Practice Sheet = 5 sheets) Designed for use on Rifles, Shotguns, Pistols. Can be used on Plastic, Metal, Wood, etc.. .25mm Vinyl Sheets - Peel off, stick on Stencils)
|
We now offer Acid Tactical ADHESIVE camo stencils. Our stencils will not leave sticky glue residue behind. They were designed to remove cleanly and not effect the paint.
For use with airbrush, spray, gun coatings, duracoat, cerakote, and other spray paints.
Stencils are heat resistant on both metal and polymers. They do not shrink on ABS and Polymers when flash curing like the yellow avery paper. They leave little to no adhesive behind so no messy clean up.
What you get.
4 - 9x14" Micro Patterns as shown.
You can use the framed pattern or the individual scales on the inside of the frame pattern.
Specifications:
Material: High Temp Vinyl film
Thickness: .25mm
Length: 14"
Width: 9"
For angled surfaces: When shaping around corners use larger stickers and allow half of the sticker to lay on each plane. If small sections of the design overlaps a corner it may not adhere well. Use scissors to trim any excess that doesn't want to adhere.
Useful Tools:
Exacto knife - Can be used to remove sticker and also to form sticker in tight angles.
Scissors - To trim excess stencil
STENCILING STEPS:
1. Basecoat your project with a good camouflage color.
2. Clean off the project to remove any dust or paint residue. Be sure to have clean hands and refrain from touching the adhesive side during application.
3. Apply the stickers to your project. Using a sharp edge such as an exacto knife or razor blade will make it easier to remove and apply the stencils.
4. After applying the stencils to your project paint directly at the object. Avoid spraying at angles.
5. Allow your project to completely dry before removing the stencil stickers.
6. Apply a clear protective coating to your project.
© Acid Tactical LLC
All images are copyright protected under U.S. & South Carolina Laws.
Acid Tactical LLC will take any necessary civil action to protect intellectual property.
| |
Many more designs available Check them out.
Warped Honeycolm
|
