ECHNICAL INFORMATION (typ.) | +20°C, 24V DC |
---|---|
Service voltage | 18 ... 28 V DC |
No-load current | 500 mA |
Control elements | 3 |
Light spot size | 5 ... 10 mm |
Emitting light source | white light LED, to be switched off |
Operating distance | 30 ... 60 mm |
Fiber-optic connection | Fixed optics |
Colour memory internal | 350 |
Number of sensing channels | 1 |
Colour channels of sensor | 4 (Teachable via buttons) 15 (Binary coating) |
Colour resolution | DE Lab < 1 |
Trigger input | TRG 0 |
Teach input | TRG 1 |
Switching output | Push pull (4x), NO/NC |
Switching hysteresis | 0 ... 255 % (10 % preset) |
Pulse stretching | 0 ... 65535 ms adjustable |
Display | 4 LEDs (Output state) 5 LEDs (programming) |
Voltage drop | < 2,0 V |
Response time/Scanning frequency | 0,2 ms (with 5000 Hz: up to 350 colours evaluable) 0,1 ms (with 10000 Hz: up to 30 colours evaluable) 0,05 ms (with 20000 Hz: 3 colours evaluable) |
Response-/release time | 0,05 ms < 20.000 Hz |
Ambient temperature, operation | -10 … +55 °C |
Switching output coding | 4 x (binary coded = 15 output conditions) 4 x (pnp + npn) |
Tolerance ranges | 5 by button / using software arbitraily |
Ambient light compensation | dynamic, can be switched off |
Protection class | IP 54 |
Protection degree | III, operation on protective low voltage |
Colour space mode | XYZ / xyY / u’v’L* / L*a*b* / xyl (Non-self-shining objects) XYZ / xyY / u’v’L / xyl (Self-shining objects) |
Detection modes | Minimum spacing (Assignment of measured colour to the stored colour with the smallest colour spacing) Check sphere (Check whether the measured colour is within a defined tolerance) Check cylinder (Check whether the measured colour is within a defined tolerance) |
Operating mode | - (Continuous) - (External triggering) - (Externally triggered colour sequence detection) - (External teaching) - (Self-shining objects) - (Non-self-shining objects) - (Each colour can be assigned to any output) |
Casing material | Aluminium anodized |