About This Product

The Everbilt 1/4 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection.

Highlights

• Aluminum motor housing for efficient motor cooling
• Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate
• 8.25 ft. cord length
• Submersible for quiet operation
• 1-1/2 in. FNPT discharge
• Semi-open thermoplastic impeller passes 3/8 in. solids
• Pumps up to 37 GPM at 10 ft., outperforms the competition

Product Information

Internet # 315023087

Model # HDSP25W

Store SKU # 1006013623

Dimensions

Product Depth (in.)	6.3 in	Product Height (in.)	10.63 in
Product Width (in.)	8.27 in	Switch-Off Height (in.)	3.94
Switch-On Height (in.)	11.81

Details

Amperage (A)	4.5 A	Cord Length (ft.)	8.25
Discharge Flow @ 0 ft. (gallons/hour)	3000	Discharge Flow @ 0 ft. (gallons/min)	50
Discharge Flow @ 10 ft. (gallons/hour)	2220	Discharge Flow @ 10 ft. (gallons/min)	37
Discharge Flow @ 15 ft. (gallons/min)	27	Features	Bottom/End Suction, Non-Clogging, Self-Priming, Submersible, Thermal Overload Protection
Housing Material	Aluminum	Impeller Material	Plastic
Maximum Horsepower (hp)	1/4	Maximum Pressure (PSI)	8.66
Maximum Working Temperature (F)	100	Minimum Sump Basin Diameter	18 or More
Minimum working temperature (F)	35	Outlet Diameter Connection (in.)	1-1/2 FPT
Pack Size	1	Power Type Required	AC
Product Weight (lb.)	8.49 lb	Pump Switch Type	Tethered
Returnable	30-Day	Vertical Lift (ft.)	20
Voltage	115v