New Generation 110V automatic Melt Flow
Index Rate Tester MFR Tester
The melt flow rate meter is an instrument for measuring the flow performance of plastic polymers at high temperature according to the test method of GB3682-2000. It is used for measuring the melt flow rate of polyethylene, polypropylene, polyformaldehyde, ABS resin, polycarbonate, nylon fluoroplastics and other polymers at high temperature. It is applicable to the production and research of factories, enterprises and scientific research institutions.
| Test method: | Quality method (MFR) with printing function |
| Temperature range: | normal temperature -400℃ |
| Display mode: |
touch screen display |
| Temperature control accuracy: | ±0.1℃ |
| Timing accuracy: | 0.1S |
| Load: can be composed: | 1.2kg; 2.16kg; 3.8kg; 5kg; 7.16kg; 10kg |
| Cutting method: | automatic and manual |
| Inner diameter of material barrel: | 9.550mm±0.025mm |
| Barrel length: | 160mm |
| Mould: | the material is tungsten carbide |
| Length: | 8.000mm±0.025mm |
| Inner diameter: | 2.095mm±0.005mm |
| Power: | 450W |
1. The heating speed is fast and the overshoot is extremely small
2. High precision in constant temperature
3. After filling, it can quickly restore the constant temperature state
4. Convenient calibration and correction of test parameters
5. Manual and automatic cutting test methods can be used
6. Touch screen display
7. Equipped with a printer to automatically print out the test results
The instrument complies with the provisions of GB/3682-2000; ASTM-D1238, D3364; JIS-K7210; ISO1133 standard.
This instrument is used to measure the melting of various polymers in the state of viscous flow.
It is suitable for polycarbonate, polyarylene sulfone, and fluoroplastics with high melting temperature.
Also suitable for polyethylene, polystyrene, resin and other plastics with lower melting temperature.
This instrument is only suitable for the determination of the melt flow rate (MFR) of the mass method, and its value can characterize the viscous flow characteristics of the thermoplastic in the molten state.
1. The single power socket must have a ground wire hole and be reliably grounded.
2. In case of abnormal display on the LCD, shut down the machine first, then restart the machine, reset the test temperature, and start the operation.
3. In normal operation, if the furnace temperature is greater than 450 ℃, the software will protect, interrupt the heating and send an alarm.
4. In case of any abnormal phenomenon, such as temperature control and display failure, shut down the machine for maintenance,
5. When cleaning the piston rod, do not scrape it with hard objects.
You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.