Fitments:

for Honda Accord 2008-2011
for Honda Accord 2014-2016
for Honda CR-V 2007-2011
for Honda FIT 2009-2011
for Honda Odyssey 2007-2011
for Honda CIVIC 2006-2007
for Honda CIVIC 2009-2011

Features:

1. High-quality materials: Manufactured using premium-grade materials,corrosion-resistant, abrasion-resistant, and impact-resistant

2. OEM-quality compliance: Tested to meet or exceed original equipment manufacturer standards

3. Safety and reliability: Equipped with lock cylinders and ignition switch, strict quality control

4. Easy installation: Designed to match the original specifications for easy installation

5. High-quality keys provided: Comes with two keys

6. High durability: Long-lasting and durable for extended lifespan

Specifications:

OE part number:
35100-SDA-A71, 06350-SAA-G30

Operation Mode: manual
Condition: New
Location:Front
Contact Type: Normally Open
Connector Type:  Plug In
Terminal: Through Hole
Mounting Type: Panel Mount
Actuator Type: Ignition
Material: magnesium alloy

Package Includes:(Showing as the picture)

1x Ignition Switch Lock Cylinder
2x Keys (with ID46 Chip)
2x Bolts
1x Bracket

About Chip:

1.The chip you will receive is 46, but not programmed. The chip key must match the engine to start the car. So you have to ask your local locksmith to do the programming, it's easy
2. The ignition lock cylinder is where the keys are inserted to ignite and start the vehicle. Over time, the cylinder will not turn due to the pins inside the cylinder being worn and damaged. This prevents you from unlocking the ignition and starting your vehicle.
3. If your vehicle will not start, your keys won't turn, or your vehicle will not shut off even with the keys removed, then you may have a damaged or broken ignition lock cylinder. The cylinder is located beside the steering wheel of your vehicle where you insert your key. It can be accessed by removing the steering column panels with a screw driver.
4.The new keys will need programming to be able to start the car. You will still need to use your old keys for the door locks. If you want to use your old key to start the car then you will need to have the lock cylinder re-keyed by a locksmith.
5. This product needs to be programmed, so you must ask a professional, otherwise it will not start.

Note:

Please check the oe number carefully before purchasing！

Please contact us if you have any question !