MIG Welding Machine - Dual Voltage 110/220V, Gas Option, 130 Amp MIG Inverter Welder W/Adjustable Speed - Full Starter Kit: Welding Gun, Ground Wire, Brush, Mask
Specification
| Item model number | SLMIGWL140.3 |
| Part Number | SLMIGWL140.3 |
| Batteries Required? | No |
| Power Source | ac_dc |
| Item Package Quantity | 1 |
| Color | Dark Blue |
| Item Weight | 22 pounds |
| Batteries Included? | No |
| Package Dimensions | 20.5 x 13.5 x 11.5 inches |
| Manufacturer | Sound Around |
13.5 inches x 20.5 inches x 11.5 inches. Weight: 22.0 lb
Item Description
- 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask
- GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup
- FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes
- DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power
- ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
Technical Specs: Construction Material: Metal Power Supply: 110V/220V (13A Power Adapter) Maximum Input Current: 110V/43.1A, 220V/21.5A Frequency Response: 50/60Hz Rated Input Power: 8.1KVA Current & Voltage Adjustment Range (MIG, A/V) : (50A/16.5V-130A/20.5V) 25℃60% Utilization Factor Output (MIG, A/V): (130A/20.5V) 40℃100% Utilization Factor Output (MIG, A/V) :（100A/19V) No-load Voltage: 42V Usable Wire: 0.2''-0.3'' -inch Wire Feed Rate: 3-15m/min Power Factor: 0.73 Efficiency: 85% Shell Protective Grade: IP21S Insulation Grade: F Welding Output: 60-125A,AC Capacity: 18 gauge (0.039") to 3/16" (0.24") mild steel only Duty Cycle: 20% @ 90 A Open Circuit Voltage: 30V 2.67KVA Welder Tips / Wire Size Installed tip will accept 0.031" Flux-Core wire Wire Spool Capacity: 2.2 lbs. Spool Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance) Extension Cord Recommendations: 3 conductor #12A or larger up to 5.91 ft. Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off) Product Dimension (L x W x H): 15.7'' x 6.7'' x 11.8'' -inches Sold as: 1 Weight: 21.06 lbs.
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.