100W Flexible Solar Panel Monocrystalline Battery Charger with Extension Cable 20A Charge Controller Power for RV Boat Cabin Car Trailer(200W-1)
Specification
20.86 "h x 37.59 "h x 0.11 "h. Weight: 1.85 kg
Item Description
- High Efficiency: solar panels use new Perc solar monocrystalline cells, up to 23% conversion rate, 100w solar panels are smaller, lighter and more portable
- Semi-Flexible: The plastic back sheet can be curved to a maximum 30 degree arc and mounted on RV, boat, cabin, tent, car, trucks, trailers or any other irregular surface
- Thin & Lightweight: 100W solar panel weighs approximately 4lb,Thickness is 0.1in,weighs 70% less than conventional solar panels, making transportation and installation a breeze
- Practicality: Light energy converts electricity, Practical and suitable for use in areas where electricity is not available and where the city cannot reach, such as mountains, marine, deserts, and remote areas
- Nice Details: The component contains a bypass diode, and the circuit uses input over current protection and reverse protection design.The solar panel has 6 grommet mounting holes are available to attach fasteners, and can also be installed with silicone and adhesive tape
Product Description
The XINPUGUANG 100W flexible solar panel is made of PERC Monocrystalline cell with a conversion rate of 23%. The weight is 4lb, which is 30% of the traditional solar panels.Size is 41.5x21.25x0.11 in.The lightweight,portable nature of flexible solar panels makes solar panels more effective for RVs, caravan,boats,trailers,cabin,etc. , easy to install, plug and play.
| Maximum power(Pmax) | 100 Watt |
| Open circuit voltage(Voc) | 21.6 Volt |
| Short circuit current(Isc) | 6.11 A |
| Maximum power voltage(Vmp) | 18 Volt |
| Maximum power current(Imp) | 5.55A |
| Temperature range | -20℃～+80℃ |
| Maximum system voltage | 700V DC |
| Weight | 1.85kg(4 lb) |
| Size | 41.5x21.25x0.11 in |
| Standard Test Conditions | 1000w/m2, Temperature 25℃,AM=1.5 |
200W solar system connection diagram
12V/parallel
24V/in series
20A charge controller
- Battery voltage: 12V/24V auto
- suitable for : lead acid batteries, lithium ions
- Build-in short-circuit protection,open-circuit protection,reverse
Extension cable
- Model: 13AWG
- Number of cores: single core multiple strands
- Voltage rating: 0.6/1KV
- Rated voltage: 1000V
- length: 10FT
Cable with alligator clip
- Model: 13AWG
- Number of cores: single core multiple strands
- Voltage rating: 0.6/1KV
- Rated voltage: 1000V
- length: 10FT
in parallel connector
- Maximum working voltage:DC1000V
- Shell Protection degree:IP67
- Specification of Connecting Line: 4mm²
- Contact Material: Copper,Tin plate
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.