DIAGNOSTIC Tool Scania VCI3 2.59.2 + and 41 similar items

? Vehicle Communication Interface 3 (VCI-3) ? Scania SDP3 (Diagnos Programmer) 2.5 [2023] Comes with 1 remote install of 2.59.2 latest SDP3 release + unlocked for industrial and marine engine use. Vehicle Communication Interface (VCI) is the interface which is used between the vehicle or an industrial and marine engine and a computer with SDP3. VCI3 can be connected to the computer via a USB cable or via wireless connection. Wireless connection between the computer and VCI3 can be made in different ways depending on the required area of application and the available options offered by the wireless network. The computer and VCI3 can either be connected via a wireless direct connection (ad-hoc) or communicate via an existing wireless network (infrastructure). Scania Diagnos Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units. Bodywork Interface Configuration Tool (BICT) is a software tool for the Bodywork Interface Configuration (BIC) function. This tool facilitates the connection of bodywork and body using the functions included in the vehicle?s electrical system. The logic programming is done in a BIC project, which in turn can contain several logic diagrams, to make the logic programming clearer. The BIC project can be saved and reused for more vehicles. BICT can be used both with and without connection to the vehicle. Without connection to a vehicle it is possible to create new projects containing logic diagrams and simulate logic diagrams. The BIC project can be saved and later used to write the BIC program to the control unit. With BICT connected to the vehicle it is possible to write a new BIC program to the control unit or update the existing BIC program in the control unit. You can also troubleshoot the BIC program in the control unit via guides in SDP3. Scania BNS II Service Tool (BST) is a PC software for diagnosis, troubleshooting and reprogramming of the multiplexed body electric system BNS II, used on buses in the Scania Omni City/Link or Citywide range. Industrial and marine engines with S6 or S8 control unit on E2011 type engines, have the diagnostic socket located on the engine. When connecting SDP3, an adapter MARINE CABLE must be used in order to connect VCI. Contact us to purchase one. Supported languages: English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.