Line 6 DL4 Mk Ii Delay Pedal and 43 similar items

DL4 MKII Delay Stompbox Modeling Pedal Delay Modeler The DL4 MkII includes everything in the original DL4 Delay Modeler, while introducing 15 new MkII delays drawn from our HX family of amp and effects processors and both 4-Switch and 1-Switch loopers with up to 240 seconds of record time (expandable to several hours using an optional microSD card). There's also an XLR microphone input, MIDI In and Out/Thru connectors, heavy duty footswitches, three bypass options, and a jack for connecting an optional expression pedal or two additional footswitches. The DL4 MkII is also smaller and lighter than the original, making it an even more appealing choice for modern musicians. 30 Ways to Delay Fans of the original DL4 delay pedal will find all of their favorite sounds exactly where they expect them to be, with the same Tweak and Tweez control parameter assignments to which they've become accustomed. The 15 new MkII delays were drawn from the HX family of amp and effects processors and include both more recent versions of classic effects and cutting-edge Line 6 originals such as the supervibey Glitch Delay. Two Ways to Loop The DL4 MkII features a simple 1-switch looper in addition to a classic 4-switch looper, both of which provide up to 240 seconds of recording time. By inserting an optional microSD card into the slot on the rear of the pedal, recording time may be extended up to several hours and a loop may be stored across power cycles. The loopers operate in either mono or stereo, and may be positioned in the signal chain before or after other effects. Microphone Input It's no secret that the DL4 has been used for processing and looping by lots of people besides guitarists, such as vocalists and others who capture their performance with a microphone. Now, dynamic microphones can be plugged directly into the pedal's XLR mic input, eliminating the need for converter cables, mixers, or other external devices. This feature also makes the DL4 MkII a handy tool for sound designers and other sonic adventurers. MIDI Magic Onboard MIDI In and Out/Thru DIN connectors enable the DL4 MkII to receive continuous controller, program change, and other MIDI messages from external sources such as MIDI controllers, thus allowing parameters to be modified dynamically and presets to be selected remotely. The DL4 MkII provides access to three presets using the A, B, and C footswitches, or six presets if the Tap switch is set to toggle between two banks of presets (A, B, and C, and D, E, and F). In addition, the DL4 MkII can store up to 128 presets, selectable via MIDI. Line 6 DL4 MKII Specs Delay 30 Types Reverb 15 Types Looper Yes, with 1-Switch and 4-Switch Interface Mono/Stereo Mono or Stereo Input and Output USB USB Type-C Port for Firmware Updates and USB MIDI Control via Computer microSD Card Slot microSD Card Slot for Expanded Looper Memory Audio Inputs 2 x 1/4" / 6.3 mm (Left/Mono and Right) Instrument Level Impedance: 1 Megohm Maximum Input Level: 11.25 dBu XLR Microphone Input with Preamp Audio Outputs 2 x 1/4" / 6.3 mm Unbalanced (Left/Mono and Right) Instrument Level Impedance: 100 Ohms MIDI 5-Pin In and Out/Thru USB MIDI In and Out/Thru for Use with Computer Applications Power Requirements 9 VDC, 500 mA Center-Pin Negative, 2.1 mm Included Line 6 DC-1g Power Adapter Dimensions 2 x 9.25 x 4.5" / 5.1 x 23.5 x 11.4 cm Weight 2.03 lb / 0.92 kg Packaging Info Package Weight 3.14 lb Box Dimensions (LxWxH) 16.1 x 7 x 2.8" In accordance with California labeling requirements: WARNING: Cancer Reproductive Harm - www.P65Warnings.ca.gov UPC: 614252311656