ERYONE PLA Filament 1kg 1.75mm High Quality, and similar items

PLEASE NOTE: Please look through the images below to see what each colour looks like. ERYONE PLA Filament is a top-notch 3D printing material, crafted from high-quality virgin plastic and vibrant colours. Our vacuum packaging ensures optimal freshness, while our tangle-free winding and tight tolerance control guarantee smooth, reliable prints. Committed to sustainability, ERYONE filament now comes on fully recyclable cardboard rolls. Looking for another type of filament? Check our booth for more options Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited Smell ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed Sealed ERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: 0.03mm Print Temperature: 190-220C Recommended Print Temperature: 210-220C Peak Melting Temp: 1555C Heated Bed Temp: 55-70C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material. VARIANTS COLOURS: