Fluke T5-600 Electrical Tester and 13 similar items

Fluke T5-600 Electrical Tester The T5-600 Electrical Tester is a versatile troubleshooting tool you can carry to every job site. Use it to check voltage, continuity, and current, all with one compact, rugged tool. Just select volts, ohms, or current and the tester does the rest. For higher voltage applications check out the Fluke T5-1000. Measure current up to 100 A without breaking the circuit with OpenJaw? design The trendsetting OpenJaw? design allows for fast and easy current measurement, safely and without metallic contact to a live conductor. The integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester would be able to. The T5-600 is also designed to: Withstand a 10 ft. (3 m) drop Conserve battery life with auto-off mode Fit in one hand with handy probe storage in the back of the holster Accept Fluke accessory test clips with the test leads Meter automatically selects AC or DC voltage for tests up to 600 V Voltage tests are faster and easier than ever before. Just turn the knob to voltage (V) and place your leads on the test points. The T5-600 auto-selects either AC or DC voltage, depending on what is detected. This meter is suitable for both residential or commercial applications and is designed to keep you safe with a CAT III 600 V rating. Specifications: Fluke T5-600 Electrical Tester Specifications Jaw opening 12.9 mm (0.5 in) Max wire size 1/0 THHN Cable Current range AC rms 0 to 100.0 A Accuracy AC current (50/60 Hz) 3% 3 counts AC response Averaging Voltage range AC/DC 0 to 600 V Voltage accuracy AC 1.5% 2 counts DC 1% 1 count Resistance range 0 to 1000 ? Continuity beeper threshold On at 25 ?, off at 400 ? Volts indicator LED threshold Guaranteed on by 30 V AC Environmental Specifications Operating temperature -10C to 50C Storage temperature -30C to 60C Humidity (without condensation) 0% to 95% (5C to 30C); 0% to 75% (30C to 40C); 0% to 45% (40C to 50C) Dust/water resistance Yes Operating altitude 2000 meters max Temperature coefficient 0.1 x (specified accuracy)/C ( 18C or 28C) Safety Specifications Measurement Category IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac Agency approvals CSA, TUV Maximum voltage 600 V between any terminal and earth ground Mechanical and General Specifications Size 30.5 x 51 x 203 mm Weight 300 g Battery life 200 hour zinc chloride, 400 hour alkaline Battery type 2 x AA Low battery indicator Yes Current sensor opening 12.9 mm