Dell PowerEdge R630 8SFF Dual Quad Core and similar items

System is clean and booted up and tested using Linux Mint 19.1 Raid install and from Thumb Drive, Hiren's Boot CD. Any drives listed in the Description below ARE NOT INCLUDED they are for testing purposes only. This also has a Windows Server 2012 R2 Std (2CPU 2 VM's) COA NO Operating System included or installed NO Software Check Out My Other Listings For Possible Need / Want System: Host: poweredgetest Kernel: 4.15.0-91-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa Machine: Type: Server System: Dell product: PowerEdge R630 v: N/A serial: DXJ6W52 Mobo: Dell model: 0CNCJW v: A08 serial: .DXJ6W52.CN747515791233. UEFI: Dell v: 1.3.6 date: 06/03/2015 Memory: RAM: total: 31.32 GiB used: 1.75 GiB (5.6%) Array-1: capacity: 1.54 TiB slots: 24 EC: Multi-bit ECC Device-1: A1 size: 8 GiB speed: Unknown Device-2: A2 size: 8 GiB speed: 2133 MT/s Device-3: A3 size: No Module Installed Device-4: A4 size: No Module Installed Device-5: A5 size: No Module Installed Device-6: A6 size: No Module Installed Device-7: A7 size: No Module Installed Device-8: A8 size: No Module Installed Device-9: A9 size: No Module Installed Device-10: A10 size: No Module Installed Device-11: A11 size: No Module Installed Device-12: A12 size: No Module Installed Device-13: B1 size: 8 GiB speed: 2133 MT/s Device-14: B2 size: 8 GiB speed: Unknown Device-15: B3 size: No Module Installed Device-16: B4 size: No Module Installed Device-17: B5 size: No Module Installed Device-18: B6 size: No Module Installed Device-19: B7 size: No Module Installed Device-20: B8 size: No Module Installed Device-21: B9 size: No Module Installed Device-22: B10 size: No Module Installed Device-23: B11 size: No Module Installed Device-24: B12 size: No Module Installed CPU: Topology: 2x Quad Core model: Intel Xeon E5-2637 v3 bits: 64 type: MT MCP SMP L2 cache: 30.0 MiB Speed: 3501 MHz min/max: 1200/3700 MHz Core speeds (MHz): 1: 3500 2: 3500 3: 3500 4: 3500 5: 3500 6: 3500 7: 3500 8: 3500 9: 3500 10: 3500 11: 3500 12: 3500 13: 3500 14: 3500 15: 3500 16: 3500 Graphics: Device-1: Matrox Systems G200eR2 driver: mgag200 v: kernel Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1600x900~60Hz OpenGL: renderer: llvmpipe (LLVM 9.0 256 bits) v: 3.3 Mesa 19.2.8 Audio: Message: No Device data found. Network: Device-1: Broadcom and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe driver: tg3 IF: eno1 state: down mac: 44:a8:42:43:23:5f Device-2: Broadcom and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe driver: tg3 IF: eno2 state: down mac: 44:a8:42:43:23:60 Device-3: Broadcom and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe driver: tg3 IF: eno3 state: up speed: 1000 Mbps duplex: full mac: 44:a8:42:43:23:61 Device-4: Broadcom and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe driver: tg3 IF: eno4 state: down mac: 44:a8:42:43:23:62 Drives: Local Storage: total: 557.75 GiB used: 32.55 GiB (5.8%) ID-1: /dev/sda model: PERC H730 Mini size: 278.88 GiB ID-2: /dev/sdb model: PERC H730 Mini size: 278.88 GiB RAID: Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] driver: megaraid_sas Partition: ID-1: / size: 273.00 GiB used: 32.54 GiB (11.9%) fs: ext4 dev: /dev/sda2 Sensors: System Temperatures: cpu: 61.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 315 Uptime: 47m Shell: bash inxi: 3.0.27